MenuSearch | Country: Finland | Currency: EUR
NT-H1 Pro-Grade Thermal Paste, 1.4ml
Discontinued
More variations available Show

Noctua NT-H1 Pro-Grade Thermal Paste, 1.4ml

Noctua’s NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, ease of use and outstanding reliability.

Features

  1. Excellent performance
  2. Maximum ease of use and efficient dosage
  3. Top-performance right from the start
  4. Excellent long-term stability
  5. Not electrically conductive, non-corroding

Excellent performance

NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimised for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.

Maximum ease of use & efficient dosage

As NT-H1 spreads very well under pressure, there’s no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that’s it!

Top-performance right from the start

NT-H1 reaches its full performance extremely fast and doesn’t require a longer “burn-in” time.

Excellent long-term stability

NT-H1 doesn’t contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound’s exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.

Not electrically conductive, non-corroding

NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there’s no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.

Review

  • Mikhailtech.com

    Noctua’s list of features for this paste couldn’t represent the product any better. It has excellent performance, is easy to install, has no burn-in time, and is not electrically conductive. Noctua NT-H1’s performance and features earn it the Editor’s Choice Award!

SpecificationsNT-H1
Volume1.4ml (for at least 15 applications)
Specific Gravity2,49 g/cm³
Colourgrey
Recommended storage time (before use)up to 2 years
Recommended usage time (on the CPU)up to 3 years
Peak operating temperature-50°C to +110°C
Recommended operating temperature-40°C to +90°C
Warranty72 months
EAN barcode4716123312680
SpecificationsNT-H1
Volume1.4ml (for at least 15 applications)
Specific Gravity2,49 g/cm³
Colourgrey
Recommended storage time (before use)up to 2 years
Recommended usage time (on the CPU)up to 3 years
Peak operating temperature-50°C to +110°C
Recommended operating temperature-40°C to +90°C
Warranty72 months
EAN barcode4716123312680

Customer Reviews

Does the job, but the tube could be better designed

,

The paste does the job just fine. It’s a little tricky to work with in tight spaces though, as the tube has a short wide nozzle. Something longer and thinner would be neater.

Top CPU Cooling Accessories

Recently Viewed Products